RTI T1-B Spezifikationen PDF herunterladen (Seite 7)

Wired Control Interfaces

KX2 In-wall Controller

The KX2 in-wall controller has a clean, sleek design with twelve

programmable hard buttons and a 2.8” color touchscreen. The hard

buttons and graphic interface are fully programmable using RTI’s

Integration Designer® software for full control of electronics throughout

the building. A built-in infrared output port allows direct control or get

two-way control when used with an RTI XP series control processor.

In addition, the unit’s integrated 10/100Base-T Ethernet port with

Power-over-Ethernet (POE) provides the exibility to accommodate any

installation.

• Ships with stylish, low-prole white bezel - bezels also available in black and light

almond.

• Faceplate and buttons are black with a glossy nish.

• Fits in a 4”x4” square electrical junction box (See important information below).

• Integrated mounting wings for easy installation in retrot installs.

• Fully customizable 2.8” display and twelve assignable/programmable buttons.

• QVGA resolution (240w x 320h) TFT LCD to display custom buttons, text and

graphics.

• Integrated 10/100Base-T Ethernet port with Power-over-Ethernet.

• IR output drives up to 1000 feet of wire.

• Optional modules/processors for voltage sensing, relays and advanced two-way

control.

• USB and Ethernet Programming.

Key Features

Specifications

Part #: 10-210486-22

Installation Notes

• Power supply not included - A separate power supply (PS16 or similar), an RTI

CB8 connecting block or a network router with Class2 Power over Ethernet (PoE)

is required for power.

• Laser Shark compatible for custom engraved button keycaps.

Power ...............................+9VDC to +16VDC, .5A max or 802.3af Power-over-Ethernet

Touchscreen Display ................... 2.8” (71mm) diagonal, high-brightness color TFT LCD

.....................................................................QVGA (240w x 320h pixels) with 65K colors

Infrared Output Port ..........................200mA output, Drives up to 1000 ft (300 m) of wire

Operating Temperature .................................................. +32°F to +122°F (0°C to +50°C)

Operating Humidity ............................................................... 5% to 95% Non-condensing

Ethernet Port .................................................... 10/100Base-T with Power-over-Ethernet

Mounting ................................. Integrated mounting wings, or screws through front bezel

Front Plate Dimensions (H x W) ....................................4.4 in (112mm) x 4.6 in (117mm)

Installation Cut-Out (H x W).............................................. 3.7 in (94mm) x 3.7 in (94mm)

Total Depth in Wall .................................................................. 1.2 in (31mm) plus cables

Weight ......................................................................................................... 7.5 oz (212g)

Warranty ................................................................................... One Year (Parts & Labor)

Laser Shark

Compatible

KX2 Accessories

Standard Bezels

BZA-KX2 - Light Almond...........................................................10-210519-19

BZB-KX2 - Black....................................................................... 10-210517-17

Premium Bezels

KX2 Installation Notes

The KX2 uses a standard 4”x4” electrical junction box. These should be available

at most hardware stores or electrical supply stores online (ex. Granger.com)

NOTES:

• A dual gang outlet box will NOT work.

• The KX2 has .38” thick corner tabs, making the KX2 protrude .38” from the front

edge of the junction box. Therefore, the electrical box should be mounted ush

with the wall stud. Typically wall sheeting materials like drywall are ½” or thicker,

allowing the KX2 to be ush with the wall sheeting. If the wall sheeting is thinner

than .38”, the junction box will need to be mounted set back.

• Use #8 – 32 at head screws.

• Box should be 1.5” minimum depth.

Electrical Junction Box

4”h x 4”w x 1.5”d

DOCUMENT NO.

12345678

8 7 6 5 4 3 2 1

REMOTE TECHNOLOGIES INC.

SHAKOPEE, MN 55379

0.534 (2)

0.648 (2)

3.375

3.200

3.789

3.375

3.789

0.200

1.188

2.354

0.712

KX2 Dimensions

0.180

4.616

4.428

3.375 0.263

3.029

DOCUMENT NO.

12345678

8 7 6 5 4 3 2 1

REMOTE TECHNOLOGIES INC.

SHAKOPEE, MN 55379

0.534 (2)

0.648 (2)

3.375

3.200

3.789

3.375

3.789

0.200

1.188

2.354

0.712

KX2 Dimensions

0.180

4.616

4.428

3.375 0.263

3.029

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

RTI T1-B Spezifikationen Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen RTI T1-B