RTI T1-B Spezifikationen PDF herunterladen (Seite 23)

Accessories

RCM-4 Ethernet Relay Control Module

The RCM-4 is equipped with four individually addressable relays. Built-in

Ethernet enables the convenience of control from an RTI XP series

control processor via the LAN. An IR input allows the RCM-4 to be

triggered from many different sources, including RTI in-wall controllers,

control processors or third-party infrared repeater systems. Commands

trigger open and close functions as well as adjustable hold times for

momentary relay operation. The RCM-4 can be powered from the

included power supply or PoE.

• Four individually addressable relays.

• Relays capable of switching up to 28VDC@5A.

• Relays can be used in a normally open or normally closed conguration.

• Relays can be controlled with both IR and Ethernet.

• Powered using power supply or class2 PoE (Power over Ethernet).

Key Features

Specifications

Power Supply .............................................................................................. +12VDC, 1A

Infrared Input ....................... Compatible with industry-standard repeaters and receivers

Relays........................................................ Four, capable of switching up to 28VDC@5A

Ethernet Port ...............................One, RJ-45, 10/100 Base-T with Power-over-Ethernet

USB Port.............................................................................................One, Programming

Mounting ............................................................................... Wall-mount or free standing

Dimensions (W x H x D) ............................ 6.8in(173mm) x 2.9in(74mm) x 1.2in(31mm)

Weight ........................................................................................................ 1.0 lb. (466g)

Warranty ................................................................................... One Year (Parts & Labor)

Part#: 10-210480-16

RM-433 RF Receiver Module

The RM-433 is a radio frequency receiving device for communicating

to RTI control systems and operates at 433MHz. The RM-433 contains

a microprocessor that monitors all received signals so that RF noise

is ltered out. When valid RF data from an RTI remote is detected, the

RM-433 passes the signal through its output driver which allows the data

to travel long distances over wire. The output driver is compatible with

industry standard infrared repeating systems, and can be wired together

with those systems or with additional RM-433 units.

• Reliable RF reception due to matched antenna, connector, and PCB.

• Modular design that allows multiple RM-433 units to be wired together allowing for

nearly any desired coverage area.

• Output signal is compatible with industry standard infrared repeating systems.

This allows multiple IR and/or RF receivers to be wired together into an RTI

control system.

• No dedicated power supply required. Power is derived directly from the RTI

control system.

• A feedback LED conrms operation.

Key Features

Specifications

Power Requirements .......................................................... +9VDC to +16VDC @ 60mA

RF Carrier Frequency ................................................................................... 433.92 MHz

Output Drive ......................................................................................... 200mA maximum

Operating Temperature .......................................................................... +32°F to +122°F

...................................................................................................................(0°C to +50°C)

Operating Humidity .............................................................. 5% to 95% non-condensing

Module Dimensions (HxWxD) .................. 3.5in (89mm) x 3.4in (86mm) x 1.0in (25mm)

Antenna Length ....................................................................................... 13 in” (330mm)

Weight .............................................................................................. 4.4 oz. (125 grams)

Part #: 10-210039-16

VPS-1 Voltage Sensor Module

The VPS-1 Voltage Power Sensor monitors the on and off status

of almost any electronic component and provides this power status

information to RTI control systems such as the XP-6 Remote Control

Processor. When the attached component is powered on, the VPS-1

detects the voltage supplied from the component, an attached power

supply, or a third-party power sensor, and sends a signal to the RTI

control system.

• Connects to the MPIO ports of RTI control processors (ex. XP-6, XP-8s etc) and

expansion modules (ex. PCM-4).

• Detects the on/off status of almost any component.

• No power supply required - Power is supplied by the output ports.

• Power sensing circuit is housed in a compact, rugged ABS enclosure.

• LED light indicates the current power status.

• Control cable can be extended up to 500 feet.

Key Features

Specifications

Output ...................................................... Compatible with industry standard IR emitters

IR Output Drive ..................................................................................... 100mA maximum

Input Requirements .............................. 3V to 24VDC -or- 9V to 30V P-P AC (50Hz min)

Maximum Current Consumption ............................................................................ 0.5mA

Control Cable Length................................................................................ 12 feet (3.7 m)

Voltage Sensor Cable Length ....................................................................... 3 feet (.9 m)

Dimensions (W x H x D) .............................. 1.75” (44mm) x 3.0” (76mm) x 0.7” (18mm)

Warranty .................................................................................. One Year (Parts & Labor)

Part #: 10-210013-08

• A 433 MHz enabled RTI remote and control processor must be used with the

RM433.

Installation Notes

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

RTI T1-B Spezifikationen Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen RTI T1-B